Updating Service Os Via Usb - HP J9666A Quick Start Manual

N o t e
hostswitch(svcs-mod-C:SvcOS)# show images
5. Update the Service OS.
hostswitch(svcs-mod-C:SvcOS)# update ServiceOS <Service OS image>
6. Boot the Service OS (optionally, boot the AppSW):
hostswitch(svcs-mod-C:SvcOS)# boot ServiceOS
Changing boot from CF Service OS to Service OS.
System will be rebooted. Do you want to continue [y/n]? y
Rebooting
7. Check the version of the updated Service OS and confirm it is running:
hostswitch(svcs-mod-C:SvcOS)# show version

Updating Service OS via USB

Any image folder (Service or application) can be put on a USB flash drive and
transferred to the Service image repository.
1. Insert a USB flash drive into a Windows PC. Make sure the drive is FAT/
FAT32 formatted and can hold all files that will be downloaded.
2. Download the entire folder that contains the Service OS to the PC.
3. Copy the Service OS folder to the USB flash drive as a subdirectory under
a /images folder.
4. Safely remove the USB flash drive from the Windows PC.
5. Insert the USB flash drive into the module. Wait for the module to
recognize the USB flash drive (flash drive light should blink a couple of
times).
6. Enter the Service OS CLI.
hostswitch# services c 1
7. Mount the USB flash drive.
hostswitch(svcs-mod-C:SvcOS)# usb mount
8. Copy the Service OS from the flash drive to the module.
hostswitch(svcs-mod-C:SvcOS)# usb copyfrom IMAGE
(Note: Tab completion may be used for the directory name.)
Software Components
Updating the Service OS
D-3