Check Filter Reset; Reset Button; Vacation Hold; Customizing Your Thermostat - Robertshaw 8625 User Manual

110-1101 7/22/04 8:16 AM
Another way to select a temporary hold is:
1. Press SELECT until the cursor is over TEMP HOLD. Press SET.
The temperature will be blinking. Use the
the temperature.
2. Press SET.
To cancel a temporary hold, press SELECT until the cursor is above
RUN/SET PROG. Press SET.

Vacation Hold

You can set your thermostat to hold a desired temperature for 1-365 days.
Vacation hold terminates at midnight of the last day. The thermostat
returns to normal operation the next day at 12:01 AM.
1. Press SELECT until the cursor is over VAC HOLD. Press SET. The
temperature will be blinking. Use the
temperature.
2. Press SET. 7d will be displayed. Use the
between 1 and 365 days.
3. Press SET.
To cancel a vacation hold, press SELECT until the cursor is above
RUN/SET PROG. Press SET.

Check Filter Reset

Once the filter timer has expired,
CHECK FILTER will turn on and stay
on. To clear the message and reset the
timer:
1. Press SELECT and SET and hold for
3 seconds. CLr will appear in the
time display.
2. Press any key to clear the message.
The display will transition to the tem-
perature scale display. See step 4 in

CUSTOMIZING YOUR THERMOSTAT.

3. No further input is needed. Within a few seconds, the display will
return to the normal operating mode.
Reset
The RESET button is located above the upper left corner of the display.
Only use the reset feature if the thermostat is malfunctioning.
MON
° F
C
Y2
R
W2/E
L
G O B Y1 W1
Page 10
or button to change
or button to change the
or button to adjust
RESET
BUTTON
10