Engine Oil And Coolant Filters; Radiator/Coolers; Fuel Filters; Transmission, Hydraulic, And Axle Filters - New Holland TG Series Performance Manual

SERVICE POINTS

Engine Oil and Coolant Filters

Vertically mounted engine oil filters permit easy, clean,
no-spillage service.
New Holland coolant filters are specially designed to
protect the cooling system from contamination and
condition the coolant to prevent erosion and cavitation.
TG Tractor -
3
Engine oil and filter – 300 hours
3
Coolant filter – 600 hours
3
Coolant and conditioner – 2100 hours
TJ Tractor -
3
Engine oil and filter – 500 hours
3
Coolant (check SCA level) – 500 hours
3
Coolant filter – 1500 hours
3
Coolant (drain & flush) – 6000 hours

Fuel Filters

Fuel filters protect the fuel system from dirt and
water damage. Use clean fuel, keep the fuel tank full
to prevent water condensation, and drain the water
separator section at regular service intervals.
TG Tractor -
3
Engine fuel filters – 600 hours
TJ Tractor -
3
Engine fuel filters – 500 hours (or when service
icon is displayed)

Radiator/Coolers

During regular service, clean the radiator, hydraulic
oil coolers, fuel cooler and air conditioning
equipment as conditions warrant.
Transmission, Hydraulic, and
Axle Filters
TG Tractor -
The combined transmission and hydraulic system are
protected from contamination by two high-performance
spin-on filters on the right hand side of the
transmission.
3
Transmission oil and filters – 1500 hours
TJ Tractor -
The transmission and hydraulic systems are
independent. The hydraulic system shares its circuit
with the axle lube system.
3
Hydraulic oil and filter – 1500 hours
3
Axle lube filter – 1500 hours
11