Additional Information For Tests Run From Custom Test/Symptom Tree - Dell precision t7400 Quick Reference Manual

Option
Extended Test
Custom Test
Symptom Tree
For any problem encountered during a test, a message appears with an error
code and a description of the problem. Write down the error code and problem
description exactly as it appears and follow the instructions on the screen. If
you cannot resolve the problem, contact Dell (see "Contacting Dell" in your
User's Guide).
NOTE:
The Service Tag for your computer is located at the top of each test screen.
When contacting Dell support, have your Service Tag ready.
The following tabs provide additional information for tests run from the
Custom Test or Symptom Tree option:
Tab
Results
Errors
Help
Configuration
(Custom Test only)
Parameters
(Custom Test only)
36
Quick Reference Guide
Function
Performs a thorough check of system devices. The test
typically takes an hour or more and periodically requires
your input to answer specific questions.
Tests a specific device in the system and can be used to
customize the tests you want to run.
Lists a number of common symptoms and allows you to select
a test based on the symptom of the problem you are having.
Function
Displays the results of the test and any error conditions
encountered.
Displays error conditions encountered, error codes, and the
problem description.
Describes the test and any requirements for running the test.
Displays the hardware configuration for the selected device.
The Dell Diagnostics obtains configuration information for
all devices from the system setup program, memory, and
various internal tests, and it displays the information in the
device list in the left pane of the screen.
NOTE:
The device list may not display the names of all the
components installed on your computer or all devices attached
to your computer.
Allows you to customize the test, if applicable, by changing
the test settings.