Belkin F5D6130 User Manual page 25

CONFIGURING THE WIRELESS NETWORK SETTINGS
Restarting the AP to Restore Normal Operation
1. Click the "Restart AP" button.
2. The following message will appear. Click "OK".
3. The following message will appear. Restarting the AP can take up to 60
seconds. It is important not to turn off the power to the AP during the restart.
4. A 30-second countdown will appear on the screen. When the countdown
reaches zero, the AP will be restarted. The AP home page should appear
automatically. If not, type in the AP's address (default = 192.168.2.254)
into the navigation bar of your browser.
Restoring Factory Default Settings
Using this option will restore all of the settings in the AP to the factory
(default) settings. It is recommended that you back up your settings before
you restore all of the defaults.
22