Zippers And Piping - Husqvarna Viking H Class E10 User Manual

ZIPPERS AND PIPING

Set the machine as illustrated. (1)
Stitch length dial
The zipper foot can be snapped onto
the right or left, depending on which
side of the foot you are going to place
against the zipper or piping. (2)
To sew past the zipper pull, lower
the needle into the fabric, raise the
presser foot and push the zipper pull
behind the presser foot. Lower the
foot and continue to sew.
The zipper foot is also used to sew
cord into a bias strip to form a piping
and to sew the piping into a seam. (3)
Set stitch length control between "1" -
"4" (according to thickness of fabric).
26