Table of Contents
Advertisement
HCD-GP8D
QQ
3 7 63 1515 0
COLD RESET
• The cold reset clears all data including preset data stored in
the RAM to initial conditions. Execute this mode when
returning the set to the customers.
Procedure:
1. Press the ?/1 button to turn the set ON.
2. Press three buttons x , [DIRECTION] and DVD u simul-
taneously.
3. The message "COLD RESET" is displayed and the set is reset.
TUNER STEP CHANGE
(EXCEPT FOR RUSSIAN models)
• A step of AM channels can be changed over between 9 kHz
and 10 kHz.
Procedure:
1. Press the ?/1 button to turn the set ON.
2. Select the function "TUNER", and press [TUNER/BAND]
button to select the BAND "AM".
3. Press the ?/1 button to turn the set OFF.
4. Press the x and [TUNER/BAND] buttons simultaneously,
and thus the channel step is changed over.
SHIP RESET
Procedure:
1. Press the ?/1 button to turn the set ON.
2. Press the DVD u button to select "DVD"
3. Remove the disc.
4. The message "NO DISC" is displayed.
5. Press three buttons x , [DIRECTION] and TAPE bB si-
multaneously.
TE
L 13942296513
6. The message "SHIP RESET" is displayed and the set is reset.
The DVD function is activated.
7. To exit from this mode, press the ?/1 button and pull out the
AC plug.
DISC TRAY LOCK
The disc tray lock function for the antitheft of an demonstration
disc in the store is equipped.
Procedure :
1. Press the ?/1 button to turn the set ON.
2. Press the DVD u button to select "DVD"
3. Set disc on the tray, press the x button and the Z button
simultaneously for five seconds.
4. The message "LOCKED" is displayed the tray is locked.
5. To release from this mode, press the x button and the Z
button simultaneously for five seconds again.
6. The message "UNLOCKED" is displayed and the tray is
unlocked.
Note: When "LOCKED" is displayed, the slot lock is not released by
turning power on/off with the ?/1 button.
PANEL TEST MODE
• This mode is used to check the software version, LCD, LED
and keyboard.
Procedure:
1. Press the ?/1 button to turn the set ON.
2. Press the DVD u button to select "DVD"
3. Press three bottons x , [PRESET EQ] and TAPE bB simul-
taneously.
www
4. When the panel test mode is activated, all segments are turned
on.
.
14
http://www.xiaoyu163.com
SECTION 4
TEST MODE
x
ao
u163
y
i
http://www.xiaoyu163.com
2 9
8
VERSION DISPLAY
• This mode is used check the model, destination, software
version.
Procedure:
1. Press three buttons x , [PRESET EQ] and MD simultaneous-
ly, the model and destination are displayed.
DVD COLOR SYSTEM CHANGE OVER
• The color system can be changed over NTSC or PAL.
Procedure:
1. Press the ?/1 button to turn the set ON.
2. Set the function to "DVD".
3. Press the ?/1 button to turn the set OFF.
4. Press the x button and ?/1 button simultaneously. The set
will power on automatically.
5. The message "COLOR PAL" or "COLOR NTSC" will be
displayed on the fluorescent indicator tube. The color system
is changed over.
Q Q
3
6 7
1 3
1 5
co
.
9 4
2 8
0 5
8
2 9
9 4
2 8
m
9 9
9 9
Advertisement
Table of Contents
