Adjustments - Bowflex treadclimber tc10 Assembly Manual

Adjustments

Moving Your Machine
The TreadClimber
( 158 lbs ) when fully assembled and requires caution when being
moved. Use the Transport Hand Bar found under the front of the
machine to move it. To get access to the Transport Hand Bar, turn the
Levelers until you have suffi cient clearance between the machine and
fl oor.
Your machine can be rolled on the transport wheels to a new location.
Lower your machine slowly into its new location without injury to your
head or fi ngers.
Do not use the uprights, handlebars, or the Console to lift or
move the machine. Injury to you or damage to the machine
can occur.
The machine may be moved by one or more persons depending on their physical abilities and capacities.
Make sure that you and others are all physically fi t and able to move the machine safely.
Place the machine on a clean, hard, level surface, free from unwanted material or other objects that may
hamper your ability to move freely. A rubber mat should be used below the machine to prevent the release
of static electricity and protect your fl ooring.
For safe storage of the machine and to prevent unsupervised operation of the machine always remove the
Safety Key and disconnect the power cord from the wall outlet and the AC input. Place the power cord in a
secure location
20
fi tness machine weighs approximately 71.8 kg
®