Philips DVD757VR /00 Service Manual page 57

Power Supply Schematic Diagram < VCR Section >
CAUTION !
For continued protection against fire hazard,
replace only with the same type fuse.
NOTE :
The voltage for parts in hot circuit is measured using
hot GND as a common terminal.
1-11-39
CAUTION !
Fixed voltage ( or Auto voltage selectable ) power supply circuit is used in this unit.
If Main Fuse (F1001) is blown, check to see that all components in the power supply
circuit are not defective before you connect the AC plug to the AC power supply.
Otherwise it may cause some components in the power supply circuit to fail.
1 2 3
" " = SMD
5.0 ~ 5.0
(2.5)
<5.0>
THE SAME VOLTAGE FOR BOTH
INDICATES THAT THE VOLTAGE
PLAY, REC & DVD MODES.
IS NOT CONSISTENT HERE.
Comparison Chart of
Models and Marks
MODEL
DVD757VR/00
DVD757VR/05
DVD757VR/02
1-11-40
PLAY MODE
REC MODE
DVD MODE
MARK
A
B
C
H9520SCP