The Rear Ports; Cabling - Atlantis Land A02-RI_M02 Interface Manual

2.3 The rear ports

Power (jack)
Console (port)
ISDN So
(RJ-45 connector)
LAN 1-4
(RJ-45 connector)
WAN
(RJ-45 connector)

2.4 Cabling

Now you should be ready to connect your MISTRAL LAN ROUTER ISDN on your LAN and
WAN or ISDN jacks. Follow these steps to install:
• Connect the router from EWAN port to an ADSL/cable modem, or attach the ISDN line to the
ISDN connector (S/T interface).
• Connect the PC to the RJ-45 LAN connector. Two or more PCs can connect to a multi-port
Hub first and then uplink (cascade) port on the hub must be connected to LAN port.
• Plug the power adapter into a wall outlet and into the AC connector on the back of Mistral
Lan Router ISDN.
Connect the supplied power adapter to this jack
Connect the supplied RS-232 cable to this port when connecting to a
PC's RS-232 port (9-pin serial port).
Connect an RJ-45 cable to this port when connecting to the ISDN.
Connect an UTP Ethernet cable to this port when connecting to a
LAN such as an office or home network.
Connect an UTP Ethernet cable to this port when connecting to the
Internet or making other WAN connections
5