D-Link DWL-7100AP Quick Install Manual page 3

Connecting The DWL-7100AP To
Your Network
A. First, connect the power adapter to the receptor at the back panel of
the DWL-7100AP and then plug the other end of the power adapter
to a wall outlet or power strip. The Power LED will turn ON to indicate
proper operation.
B. Insert an Ethernet cable into the LAN port on the back panel
of the DWL-7100AP and an available Ethernet port on the network
adapter in the computer you will use to configure the DWL-7100AP.
The Link LED for the LAN Port will illuminate to indicate a proper
connection.
C. Computers with 802.11a/b/g wireless adapters can connect to the
DWL-7100AP. The DWL-AG660 AirPremier
Adapter and the DWL-AG530 AirPremier
connect, out of the box, with the DWL-7100AP, using their default
settings.
A. Receptor for
Power Adapter.
C. Antennas
Used to wirelessly
connect to 802.11a/b/g
adapters.
Reset Button
Pressing this button restores
the access point to its original
factory default settings.
B. LAN Port is for
connecting to a switch
on the local network
with an Ethernet cable
3
Wireless Cardbus
TM
Wireless PCI Adapter will
TM