Removing The Basket Drive Pulley - Whirlpool WFC7500VW0 User Manual

REMOVING THE BASKET DRIVE PULLEY

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. Pull the washer away from the wall.
4. Remove the rear panel from the washer
(see page 4-20 for the procedure).
5. Remove the drive belt from the pulley by
rotating the pulley and pulling the belt off
(see the top right photo).
6. Use a large screwdriver and lock the pul-
ley, then remove the 15/16˝ nut from the
drive pulley.
Drive Belt
7. Pull the basket drive pulley off the basket
shaft and remove it.
4-22
Basket Drive Pulley
18 mm Nut
Basket Drive Pulley