Package Contents; Hardware Installation; Quick Installation Guide - D-Link DCS-6620 Quick Installation Manual

Quick Installation Guide

Package Contents

If any of the items are missing, please contact your reseller.
DCS-6620
PTZ Internet
Camera &
Remote
Control

Hardware Installation

Connect the Ethernet Cable
Connect an Ethernet cable to the Ethernet connector
located on the Internet Camera's back panel and attach it
to the network.
Attach the External Power Supply
Attach the external power supply to the DC power input
connector located on the Internet Camera's back
panel(labeled DC 12V) and connect it to an AC power
outlet.
Both the red and green LEDs will flash alternately and only
the red LED will remain lit. The green LED will not come
on until you have configured your camera.
If you already connect your device correctly, please refer to the Manual in the CD for
software utility installation step by step. You will install a software and use it to search and
connect the camera.
DCS-6620
PTZ Internet Camera
CD-ROM with
Manual and
Software
A/V Cable &
Category 5
Ethernet Cable
1
Power Adapter Camera Stand