Image Protection; Protecting And Unprotecting A Single Image; Protecting And Unprotecting All Images - Casio QV-3000EX/Ir User Manual

Protecting an
1.
Align the POW
2.
Press /.
Use the following operations when you want to protect
3.
images against accidental deletion. A protected image
Use [
E
cannot be deleted until it is unprotected. You can protect
and unprotect a single specific image, all the images in a
particular folder, or all images currently on the memory
card.
] and [ F ] to select the folder you want to
IMPORTANT!
protect.
Formatting a memory card (page E-35) deletes all
4. images on the card, even if some or all of the images
Press SET.
are protected.
5.
Press MENU.
6.
Select "Tools"

Protecting and Unprotecting a Single Image

• "Tools" appears on the advanced menu only.
1.
Align the POWER/Function Switch with PLAY.
7.
Select "Protect" or "Unprotect".
2.
Press MENU.
• The indicator in the upper left corner of an image
when image information is turned on indicates it is
3.
Select "Tools"
protected.
• The indicator does not appear when an image is
• "Tools" appears on the advanced menu only.
not protected.
Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com

IMAGE PROTECTION

IMAGE PROTECTION
"Protect" "Folder".
"Protect" "Select".
4.
Select the image you want to protect.

Protecting and Unprotecting All Images

on a Memory Card
1.
Perform steps 1 through 2 under "Protecting
and Unprotecting a Single Image".
2.
Select "Tools"
• "Tools" appears on the advanced menu only.
3.
Select "Protect" or "Unprotect".
• Selected images are indicated by
• The indicator in the upper left corner of an image
when image information is turned on indicates it is pro-
• Repeat step 4 to select other images if you want.
tected.
5.
After all the images you want to protect are
• The indicator does not appear when an image is
selected, press SET to protect them.
not protected.
E-89
"Protect" "All".
.