Rotating an Image
The following operation rotates an image.
IMPORTANT!
The rotate icon is blue, indicating that the image rotate
operation is disabled when the displayed image is a
movie or panorama image.
1.
Slide the Function Switch to PLAY.
2.
Use [+] and [–] to display the image you want to
rotate.
3.
Press MENU.
8.
If you want to protect or unprotect other im-
ages, repeat steps 6 and 7.
• To exit the image protect operation, press MENU. The
image protect operation is also cancelled automati-
cally if you do not perform any button operation for
about one minute.
EDITING IMAGES
4.
Use [+] and [–] to select
TOOL, and then press
the shutter button.
5.
Use [+] and [–] to select
ROTATE, and then press
the shutter button.
6.
Use [+] and [–] to specify
the rotation, and then
press the shutter button.
IMPORTANT!
The above operation only rotates the displayed repre-
sentation of the image, without actually rotating the im-
age itself. This means that uploading the image to a
computer or outputting it to a QV Color Printer sends
the original un-rotated image.
IMAGE PROTECTION
Protecting and Unprotecting All Images in
Memory
1.
Slide the Function Switch to PLAY.
2.
Press MENU.
3.
Use [+] and [–] to select
TOOL, and then press
the shutter button.
4.
Use [+] and [–] to select
P R O T E C T , a n d t h e n
press the shutter button.
IMAGE PROTECTION
Use the following operations when you want to protect im-
ages against accidental deletion. A protected image cannot
be deleted until it is unprotected. You can protect and
unprotect a single specific image, or all images currently in
memory.
Protecting and Unprotecting a Single Image
1.
Slide the Function Switch to PLAY.
2.
Press MENU.
3.
Use [+] and [–] to select
TOOL, and then press
the shutter button.
53
54
IMAGE PROTECTION
5.
Use [+] and [–] to select ALL, and then press
the shutter button.
6.
Use [+] and [–] to select ALL (protect) or CAN-
CEL (unprotect), and then press the shutter
button.
• The
indicator that is shown in the upper left corner
of the images when image information is turned on
(page 16) indicates they are protected.
• The
indicator does not appear when images are not
protected.
55
56
4.
Use [+] and [–] to select
P R O T E C T , a n d t h e n
press the shutter button.
5.
Use [+] and [–] to select
PAGE, and then press
the shutter button.
6.
Use [+] and [–] to select the image you want to
protect or unprotect.
7.
Press the shutter button to toggle image pro-
tection on and off.
• The
indicator in the upper left corner of an image
indicates that it is protected.