Replacing the USB Board
1. Slide the USB board toward the right side of the lower case, with the I/O ports of the USB
board extruding from their port holes, and then lower the USB board in place. Press down
to secure in place.
2. Position the USB board cables on the lower case, and then press down to secure the
cables to the lower case (1).
3. Connect the USB board cable to both the mainboard and the USB board (2), and then
close the connector latches (3).
Machine Maintenance
Downloaded from
www.Manualslib.com
Figure 1-122. USB Board
Figure 1-123. USB Board Cable
manuals search engine
0
3-79