Employer's Responsibilities - Hitachi N3804AB3(S) Instruction And Safety Manual

(4) Check Push Lever before use. Make sure the Push
Lever operates properly. (The Push Lever may be
called "Safety".) Never use the Stapler unless the
Push Lever is operating properly, otherwise the
Stapler could drive a fastener unexpectedly. Do not
tamper with or remove the Push Lever, otherwise
the Push Lever becomes inoperable.
(5) Keep all screws and covers tightly in place. Keep
all screws and covers tightly mounted.
Check their condition periodically. Never use the
Stapler if parts are missing or damaged.
(6) Do not load fasteners with Trigger or Push Lever
depressed. When loading fasteners into the Stapler
or when connecting the air hose,
1) do not depress the Trigger;
2) do not depress the Push Lever; and
3) keep the Stapler pointed downward.
(7) Keep hands and feet away from firing head during
use. Never place your hands or feet closer than 8
inches (200 mm) from the firing head. A serious
injury can result if the fasteners are deflected by
the workpiece, or are driven away from the point
of entry.

EMPLOYER'S RESPONSIBILITIES

1. Ensure that this MANUAL is available to operators
and personnel performing maintenance.
2. Ensure that Staplers are used only when operators
and others in work area are wearing EYE
PROTECTION.
3. Enforce the use of EYE PROTECTION by operators
and others in work area.
KEEP IT AVAILABLE FOR OTHERS!
SAFETY
SAVE THIS MANUAL AND
— Continued
WARNING
(8) Do not drive fasteners into thin boards or near
corners and edges of workpiece.
The fasteners can be driven through or away from
the workpiece and hit someone.
(9) Never drive fasteners from both sides of a wall at
the same time. The fasteners can be driven into
and through the wall and hit a person on the
opposite side.
(10) Check for live wires. Avoid the risk of severe
electrical shock by checking for live electrical wires
that may be hidden by walls, floors or ceilings. Turn
off the breaker switch to ensure there are no live
wires.
(11) Never carry Stapler by hose.
(12) Do not disconnect air hose from Stapler with finger
on Trigger. The Stapler can fire when reconnected
to An air supply.
(13) Handle Stapler correctly. Operate the Stapler
according to this Manual. Never allow the Stapler
to be operated by children, individuals unfamiliar
with its operation or unauthorized personnel.
(14) Never use Stapler for applications other than those
specified in this manual.
(15) Never modify or alter a Stapler. Doing so may cause
it to malfunction and personal injuries may result.
4. Keep Staplers in safe working order.
5. Maintain Staplers properly.
6. Ensure that Staplers which require repair are not
further used before repair.
English
7