3 Before using
•
The Media type setup menu is displayed on the operation panel.
TIP
• For changing the media type, set the media type as shown in "3.4.3 Setting media type".
3.4.3
Setting media type
This section explains how to setup for the media type.
Follow the procedure below to set the media type.
1. Turn ON the printer and load media.
•
After the media is loaded, the display shifts to the media type setup menu.
TIP
• Refer to the followings for media loading.
3.4.2 Setting roll media
2. Press the [+] key or [–] key to select the type of the loaded media.
VJ-1204 OPERATION MANUAL
3-18