Hitachi NT 65GB Technical Data And Service Manual page 31

Spark Plug (A) [5]
Connector of
Packing [19]
the motor
(b) Reassembly
Conduct reassembly by reversing the disassembly procedure. Note the following points:
• When mounting the cylinder head section to the main body, align the core Cylinder Ass'y (A)
[104A] with the core of the cylinder head section, and then tighten the Nylock Hex. Socket Hd.
Bolt M4 x 12 [6].
• Perform wiring as shown in Fig. 23.
• Push in the Adapter [20] until it contacts the Cylinder Head [7A].
Spark plug cable
Wiring connected
to the motor
Machine Screw M4 x 10 [62]
Fig. 23
-28-
Support (B) [59]