Linksys WUSB11 ver. 2.6 User Manual page 8

Wireless usb network adapter instant wireless series

Hide thumbs Also See for WUSB11 ver. 2.6:

Table of Contents

Enlarged version

4. If you chose Infrastructure Mode, go to Step 5 now. If you chose Ad-Hoc

Mode, select the correct operating channel for your network. The channel

you choose should match the channel set on the other devices in your wire-

less network. Then click the Next button.

5. The Setup Wizard will ask you to review your settings before it starts to copy

files. Click the Next button to save these settings, or click the Back button

to change any settings.

Instant Wireless

Figure 4-4

Figure 4-5

Series

Wireless USB Network Adapter

6. After the software has been successfully installed, the screen in Figure 4-6

will appear. Click the Exit button.

Figure 4-6

Proceed to "Chapter 5: Hardware Installation."

Table of Contents