Linksys WUSB11 ver. 2.6 User Manual page 10

Wireless usb network adapter instant wireless series

Hide thumbs Also See for WUSB11 ver. 2.6:

Table of Contents

Enlarged version

1. Attach the separate adhesive strip of vel-

cro to the wall that you will be mounting

the Adapter.

2. To attach the Wall Mount to the Adapter,

slide the Wall Mount into the grooves on

the back panel of the Adapter, as shown in

Steps A, B, and C.

STEP A

STEP B

Instant Wireless

Figure 5-6

Figure 5-7

Figure 5-8

Series

Wireless USB Network Adapter

STEP C

3. Using the velcro strip on the Adapter's Wall Mount, attach the Adapter to the

velcro strip on your wall.

If your PC is running Windows XP, proceed to "Chapter 6: Driver

If your PC is running Windows 98SE, Me, or 2000, the installation of the

Wireless USB Network Adapter is complete. If you want to check the link

information, search for available wireless networks, or make additional

configuration changes, proceed to "Chapter 7: Using the WLAN Monitor

Figure 5-9

Installation and Configuration for Windows XP."

for Windows 98SE, Me, and 2000."

Table of Contents