Advertisement
Link
Your IP interfaces are listed. Click on an interface to configure it.
You can configure the Gateway to send packets to a
default gateway if it does not know how to reach the destina-
tion host.
If you have PPPoE enabled, you can specify that packets
destined for unknown hosts will be sent to the gateway being
used by the remote PPP peer.. If you select ip-address, you
must enter the IP address of a host on a local or remote net-
work to receive the traffic.
The IP Address of the default gateway.
You can enable PPPoE and the number of PPPoE Sessions. The IP
Interface(s) should be reconfigured after changing this set-
ting.
You can configure the ATM circuits and the number of Sessions. The IP
Interface(s) should be reconfigured after making changes
here.
Advertisement
