Advertisement
The Simple Network Management Protocol (SNMP) lets a network administrator
monitor problems on a network by retrieving settings on remote network devices.
The network administrator typically runs an SNMP management station program
on a local host to obtain information from an SNMP agent such as the Cayman
Gateway.
BOTH
Adds the specified name to the list of communities associated with the Cayman
Gateway. By default, the Cayman Gateway is associated with the public commu-
nity. You can associate as many as 16 communities with the Cayman Gateway.
BOTH
Enables or disables SNMP trapping. If SNMP trapping is enabled, your Cayman
Gateway sends authentication traps to all SNMP trap destinations. You must
enable trap authentication before you set up your trap destinations.
BOTH
Identifies the destination for SNMP trap messages. The ip-address argument is
the IP address of the host acting as an SNMP console. The optional
community community-name identifies the name of the Cayman Gateway
community, which is included in the trap message the device sends to the man-
agement console. This name, which is not used for authentication, does not have
to match a predefined community name.
BOTH
Identifies the system contact, such as the name, phone number, beeper number,
or email address of the person responsible for the Cayman Gateway. You can
enter up to 256 characters for the contact_info argument. You must put the
contact_info argument in double-quotes if it contains embedded spaces. .
BOTH
Identifies the location, such as the building, floor, or room number, of the Cay-
man Gateway. You can enter up to 256 characters for the location_info argu-
ment. You must put the location_info argument in double-quotes if it
contains embedded spaces.
You can configure system settings to assign a name to your Cayman Gateway and
to specify what types of messages you want the diagnostic log to record.
BOTH
Specifies the name of your Cayman Gateway. Each Cayman Gateway is assigned
a name as part of its factory initialization. The default name for a Cayman Gate-
way consists of the word "Cayman-2E" and the serial number of the device; for
example, Cayman-2E810700. A system name can be 1-64 characters long. Once
Advertisement
