Advertisement
BOTH
Specifies the type of protocol being redirected.
BOTH
If you select other, specifies the number of the protocol you want to translate.
BOTH
Specifies the first port number in the range being translated.
BOTH
Specifies the last port number in the range being translated.
BOTH
Specifies the IP address of the internal host to which traffic of the specified type
should be transferred.
BOTH
Specifies the port number your Cayman Gateway should use when forwarding
traffic of the specified type. Under most circumstances, you would use the same
number for the external and internal port.
You can use the following commands to configure basic settings, port authentica-
tion settings, and peer authentication settings for PPP interfaces on your Cayman
Gateway.
ENET
Enables or disables PPP over Ethernet on your 2E-H unit. You must enable PPPoE
before you can enter other PPP settings.
Advertisement
