HP Z620 Disassembly Instructions Manual page 3

Remove the graphics card and any other expansion cards. Push down on the expansion card
8.
retention clamp levers (1) on the outside of the chassis to open the retention clamp as shown
below.
Release the card slot latch (
Remove the power supply. Pull out the power supply locking handle marked with the green
9.
tab. Use the handle to pull the power supply out of the chassis
10. Remove all components from the workstation.
EL-MF877-00
Template Revision A
2)
, and then carefully lift the card from the chassis (3).
678155-001 (HP Z620 Workstation Disassembly Instructions)
.
Page 3