Installing a DSL wall filter
For a wall-mounted DSL filter, install the DSL filter between the original wall plate and
the wall-mounted phone.
1. Lift the phone from the wall pegs, and disconnect the phone cord from the phone
2. Connect the phone cord from the back of the DSL filter into the phone jack, and
3. Connect the phone cable to the phone jack located on the front of the mounted
4. Attach the phone to the mounting pegs on the DSL filter.
14
Chapter 2
jack.
mount the filter on the wall plate pegs using the keyhole slots.
DSL filter.
Note: If you have a DSL gateway, you can connect it to the DSL port at the bottom
of the filter.
Setting up the Gateway
To gateway
(optional)