Connecting Voip Telephones; Connecting An Iptv Set-Top Box - Pace 5268ac User Manual

Connecting VoIP telephones

The gateway includes one RJ-14 port (Voice 1 & 2) with the capacity to support 2
phone lines using a splitter or multi-jack adapter.
WARNING:
especially if your home has an alarm system. Ensure that you are subscribed to voice
service before using the voice lines on the gateway.
1. Connect one end of the phone cable to the gray Voice 1 & 2 port on the gateway.
2. Do one of the following:
Note: To prevent interference with cordless phones, ensure that the gateway is at
least 5 feet (1.5 m) from the cordless phone base station.
After the gateway recognizes a phone, the corresponding status lights (Voice 1 and
Voice 2) turn steady green and blink when the associated phone is active.

Connecting an IPTV set-top box

You can connect an IPTV set-top box to the gateway for television service.
1. Connect one end of the coaxial cable to the Cable port on the gateway.
2. Connect the other end of the coaxial cable to the Cable input (Video in) port on the
After the gateway recognizes the set-top box, the Home PNA light turns steady green,
and blinks when the set-top box starts transferring data with the gateway.
Note: For more information, see the instructions that came with the set-top box.
12 Chapter 2
Do not connect the VoIP lines to your current home telephone wiring,
•
For one phone, connect the phone cable directly to the telephone.
•
For two phones, connect the phone cable to a splitter and then to the phones.
set-top box.
Setting up the Gateway