Kyocera Ecosys FS-C2126MFP+ Operation Manual page 34

Key
Sub Address To communicate using the sub address, press
this key. For details, refer to Sub Address
Communication on page 4-32.
Encrypted TX To send faxes using encryption, press this key.
For details, refer to Encryption on page 6-21.
TX Start Speed If a communication error occurred, press this key
to change the TX Start Speed. Select the speed
from 33,600 bps, 14,400 bps, and 9,600 bps.
ECM ECM (error correction mode) is a function to
automatically resend an image that has not been
correctly sent or received due to the effects of
noise on the telephone line during transmission.
To change the ECM communication setting, press
this key.
Description
On Hook
Press this key to connect to the telephone line.
When the FAX number has been entered, the machine
starts dialing to the receiving system.
After pressing this key, you can dial the number of the
receiving system using the numeric keys. For details,
refer to Manual Send on page 4-10.
Dialing methods without using the numeric keys
• Using the Address Book (Refer to page 3-15.)
• Using One-touch Keys (Refer to page 3-26.)
• Manual Redial (Recall) (Refer to page 3-29.)
3-5
FAX Operation (Basic)
3