Netopia 3387W-ENT Getting Started Manual page 38

7-6 Getting Started Guide
Select Restart System and press Return. You will be prompted to confirm this choice. Select CONTINUE and
press Return.
The router will reboot and your settings will be enabled.
This completes your setup. For more advanced features, refer to the Firmware User Guide on your Netopia CD.
Utilities & Diagnostics...
Ping...
Trace Route...
Telnet...
Disconnect Telnet Console Session...
Trivial File Transfer Protocol (TFTP)...
Restart System...
Utilities & Diagnostics...
+----------------------------------------------------+
+----------------------------------------------------+
| If you restart this device, network traffic will be|
| disrupted, and current Telnet sessions
| will be lost. Are you sure you want to do this?
|
| CANCEL
|
+----------------------------------------------------+
Restart System...
Revert to Factory Defaults...
CONTINUE
Revert to Factory Defaults...
|
|
|
|
|