Netopia 3387W-ENT Getting Started Manual page 10

2-4 Getting Started Guide
Connect your computer, DSL line, and power source as shown.
DSL or Cable
Modem
1. For a direct computer to router Ethernet connection, use the standard Ethernet cable included with your
router.
2. Use the supplied RJ-45 Modem cable to connect the router to your cable or DSL modem's Ethernet port.
Be sure your cable or DSL modem is correctly installed according to its instructions.
3. Connect the supplied power brick to a power outlet and the connector end to the router.
4. Each computer using the wireless network requires its own Wi-Fi CERTIFIED™ 802.11b adapter to be
installed in the computer.
This may be purchased from any Wi-Fi CERTIFIED™ manufacturer for your particular computer.
You should now have: the power adapter plugged in; the Ethernet cable connected between the router and your
computer; and the telephone cable connected to its appropriate wall jack.
Ethernet
Modem
Modem
4 3
2
DC Power
LAN 2 1 Power
1
Off / On
3
4