Netopia 3346-ENT Getting Started Manual page 16

4-2 Getting Started Guide
1. Go to the Start
Menu/Settings/Control
Panels and double click
the Network icon. From
the Network components
list, select the
Configuration tab.
Select TCP/IP-->Your Network Card. Then select
2.
Properties. In the TCP/IP Properties screen, select the IP
Address tab. Click "Obtain an IP Address automatically".
3. Click on the DNS Configuration tab. Click Disable DNS.
DNS will be assigned by the router with DHCP.
4. Click OK in this window and the next window. When
prompted, reboot the computer.
Note: You can also use these instructions to configure other computers on your network to accept IP addresses
served by the Netopia 3346-ENT.