Gsm7224R Rear Panel; Gsm7248R Front Panel And Leds - NETGEAR ProSafe GSM7248R Hardware Installation Manual

Managed Layer 2 Switches GSM7224R and GSM7248R Hardware Installation Guide

GSM7224R Rear Panel

The rear panel has a console port, a redundant power supply connector, and a standard AC power
receptacle for the supplied power cord.
Console
Figure 1-2

GSM7248R Front Panel and LEDs

The following figure shows the front panel of the GSM7248R. The front panel contains LEDs, a
USB port, a RST (reset) button, RJ-45 jacks, and copper/fiber combo ports.
LEDs USB port
Reset
button
Figure 1-3
For information about the LEDs on the front panel of the switch, see
page 1-3.
1-2
Redundant
power supply
connector
RJ-45 jacks
v1.0, November 2007
Power receptacle
"Interpreting the LEDs" on
Copper/fiber
combo ports
Introduction