Changing The Power Illuminator; Changing The Spectrum Analyzer Display - Sony FST-ZX8 Operating Instructions Manual

Changing the power
illuminator
You can select the power illuminator as you
want.
Press ILLUMINATION repeatedly to select
the power illuminator you want when the
system is turned on.
Each time you press the button, the power
illuminator changes cyclically as follows:
PATTERN 1 t PATTERN 2 t PATTERN 3
t PATTERN 4 t PATTERN OFF
When X-ROUND mode is selected
(FST-ZX8 only)
Each time you press the button, the power
illuminator changes cyclically as follows:
X-PATTERN* y PATTERN OFF
*
The power illuminator will synchronize with the
selected X-ROUND effect.
Notes
• When you turn VOLUME +/– (or press
VOLUME +/– on the remote), power illuminator
shows the current volume level.
• During the demonstration display, you can turn on or
off power illuminator by pressing ILLUMINATION.
Changing the spectrum
analyzer display
1
Press AMP MENU repeatedly to select
"SPECTRUM".
The last selected spectrum appears in the
display.
2
Press < or , repeatedly to select the
setting you want.
The display changes as follows:
T
SPECTRUM 1
Y
SPECTRUM OFF
R
t
SPECTRUM 4
When X-ROUND mode is selected
(FST-ZX8 only)
The display changes as follows:
X-POSITION* y SPECTRUM OFF
*
The spectrum analyzer display will synchronize with
the selected X-ROUND effect.
3
Press ENTER.
t
SPECTRUM 2
Y
SPECTRUM 3
R
T
31 GB