Network Features
LLDP-MED Time-out Period
Currently, Aastra IP Phones have a 5 second time-out for listening to LLDP-MED
responses when the phone is booting up. If LLDP-MED responses are received after
this initial listening period, the phone will ignore the response. Now administrators
can configure this time-out interval using the new "lldp startinterval" parameter.
This parameter is only valid during the phone bootup process and it will control the
LLDP-MED time-out interval where the phone sends LLDP-MED advertisements and
listens for the LLDP-MED responses from the switch before proceeding to the DHCP
stage. The default value of this parameter is 5 seconds.
Configuring LLDP-MED Time-out Period
Use the following parameters to configure the LLDP-MED time-out period:
Parameter–
lldp startinterval
Description
Format
Default Value
Range
Example
RN-001037-02 REV03 – 06.2011
Configuration Files
Control the LLDP start interval.
Integer
5 (seconds)
0- 65535
lldp startinterval: 7
Additional Information
aastra.cfg, <mac>.cfg
18