Equipment Check; Emission Control - Echo srm-251e Operator's Manual

6

EQUIPMENT CHECK

Use only ECHO approved attachments. Serious injury may result from the use of a non-approved attachment
combination. ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which
have not been tested and approved by ECHO. Read and comply with all safety instructions listed in this manual and
safety manual.
• Check unit for loose/missing nuts, bolts, and screws. Tighten and/
or replace as needed.
• Inspect fuel lines, tank, and area around carburetor for fuel leaks.
DO NOT operate unit if leaks are found.
• Inspect shield for damage and ensure that the cut-off knife is
securely in place. Replace if either is damaged or missing.
• Check that the cutting attachment is firmly attached and in safe
operating condition.
• Check that front loop handle and shoulder strap/ or shoulder/
waist harness are adjusted for safe, comfortable operation. See
Assembly Section for proper adjustment.
E C
MISSION ONTROL
EPA Phase 2 SRM-251E
The emission control system for this engine is EM (Engine
Modification).
IMPORTANT ENGINE INFORMATION
ENGINE FAMILY: 6EHXS.0254ED DISPLACEMENT: 25.4
EMISSION COMPLIANCE PERIOD : 300 HRS.
THIS ENGINE MEETS U.S. EPA PHASE 2 EMISSION REGULATIONS
FOR SMALL NONROAD ENGINES. REFER TO OWNER'S MANUAL
FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.
An Emission Control Label is located on the engine. (This is an EXAMPLE ONLY, information on label varies by engine
FAMILY).
The 300 hour emission durability compliance period is the time span selected by the manufacturer certifying the
engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures are
followed as listed in the Maintenance Section of this manual.
WARNING
ENGINE FAMILY: 6EHXS.0254KE DISPLACEMENT: 25.4 cc
CC
EMISSION COMPLIANCE PERIOD: 300 Hours
THIS ENGINE MEETS U.S. EPA PH2 AND 2005 - 2006
CALIFORNIA EXH EMISSION REGULATIONS FOR SORE
REFER TO OWNER'S MANUAL FOR MAINTENANCE SPECIFI-
CATIONS AND ADJUSTMENTS.
PRODUCT EMISSION DURABILITY
DANGER
California Tier 2 SRM-251
The emission control system for these engines is EM/
TWC (Engine Modification and Catalyst).
IMPORTANT ENGINE INFORMATION
.
S