Remote Control - Pioneer DV-37 Service Manual

DV-37, DV-S77, DV-S737, DV-737, DV-737-K

Remote Control

KU/CA Type
All of the command buttons on the remote control glow in the dark
for easy control of the player even in the dark.
Hold the unit under a light for optimal results.
90
(Buttons indicated with * are used for menu operation.)
1
MENU button*
Use to display or close the DVD menu screen.
2
(standby/on) button
Press to switch the player on or to put in standby.
3
AUDIO button
Press repeatedly to select one of the audio languages and/or
audio formats programmed on a DVD.
For Video CD and CD, each press changes the audio output as
follows.
=
=
Stereo 1/L (Left)
4
DISPLAY (DISP) button
Press during playback to display statistical disc information.
Press repeatedly to display different information.
5
SETUP button*
Press when the player is in either play or stop mode to open
and close the Setup screen.
6
MULTI DIAL
Use to control the rate of playback according to the speed at
which MULTI DIAL is turned. When the Jog Mode is on, frame
by frame scanning in both forword and reverse directions is
possible.
7
VIDEO ADJUST (V.ADJ) button
Various attributes of the video presentation can be adjusted to
suit the program type or personal preferences. Press VIDEO
ADJUST (V.ADJ) to display the on-screen options.
8
FUNCTION MEMORY (F.MEM) button
Press to incorporate a menu item into a shortcut list that is
stored in memory and can be called up at any time.
9
PLAY 3 button
Press to start disc playback.
0
STOP 7 button
Press to stop playback. Pressing once enables playback to
resume from a point shortly before the location where it was
stopped. Pressing twice causes the disc to return to the
beginning of the disc when playback starts again.
-
PREVIOUS 4/NEXT ¢ buttons
During playback, press PREVIOUS 4 to go back to a
previous chapter/track and NEXT ¢ to advance to the next
chapter/track.
=
2/R (Right)