Verify Installation; Verify Connections - Cisco ubr924 Installation And Startup

Verify Installation

Verify Connections

Internet
Step 1
From a PC connected to the router, start the Internet browser program installed on the PC.
Step 2
In the appropriate area of the web browser screen, enter a URL of your choice.
Note: If a URL is not known, try using http://www.cisco.com.
If the selected web page displays, the Ethernet network installation is successful.
Step 3
Watch the appropriate Ethernet LED (1 through 4) on the front of the router blink as data is
transmitted on the link.
Step 4
Repeat steps 1 through 3 for each PC connected to the router.
VoIP Telephone
Step 1
Pick up a telephone connected to one of the router's VoIP (V1+V2 or V2) rear ports.
Note: The router must be configured to support voice.
Step 2
Dial a telephone number.
The Cisco uBR924 cable access router is able to implement multiple classes of service (CoS) on the
cable interface.
Note: Separate CoS streams are only available when the router is connected to a headend that supports
multiple classes of service per Cisco uBR924 cable access router. In addition, the configuration file downloaded
to the router must specify use of multiple classes of service.
Caution
The Cisco uBR924 cable access router interoperates with a DOCSIS 1.0 CMTS that does not
support multiple classes of service per router. Because voice and data will be mixed, however, voice
traffic will be transmitted on a best effort basis. This can cause poorer voice quality and lower data
throughput when calls are made from the router's telephone ports.
Voice quality is also affected by users transmitting or downloading large files, as well as other significant
network traffic.
11