Samsung mini DVM Series Service Manual page 70

No Parts
2 Ass'y Control In
Samsung Electronics
Procedure
1) Remove 2 fixing screws from the
Electronic Component part and separate
the Sensor Wire and Holder.
2) Separate the Case by pressing the hook.
3) Separate the Terminal Block Ass'y for
connection of the power cable and the
communication cable.
4) Separate the fan Motor Connector,
Sensor Connector, Drain Pump, and Flat
S/W Connector.
5) Remove the Electronic Component part
from the Indoor Unit.
Disassembly and Reassembly
Remark
4-12