Smart Wizard Setup; Manual Setup; Understanding Adsl Microfilters - NETGEAR Wireless ADSL Modem Router Setup Manual

Smart Wizard Setup

The Smart Wizard setup process should take about 20 minutes to complete.
1. Locate the ADSL settings information your Internet service provider gave you.
2. Insert the NETGEAR CD into a Windows PC.
The CD will automatically start and detect the language you are using on your PC.
Note: If the CD does not automatically start, browse the CD and double-click on
Autorun.
3. Accept the language option or change to a different language.
4. Click Next to proceed.
5. Click Setup to start the Smart Wizard installation assistant. Follow the instructions on the
screen.

Manual Setup

Use the topics and procedures below to manually set up your wireless ADSL modem router.

Understanding ADSL Microfilters

ADSL technology uses the same wires as your telephone service. However, ADSL adds signals to
the telephone lines which create noise in the telephone service. You must use ADSL microfilters to
filter out these signals before they reach your telephone.
Note: If you purchased the wireless ADSL modem router in a country where a microfilter
is not included, you must acquire one.
Connecting the Router to the Internet
Wireless ADSL Modem Router Setup Manual
v1.1, 2006-2
1-5