Table of Contents
Advertisement
MENU OPERATIONS
H. Move : After searching the position you want by Goto the position item, you can
tune the antenna to go to the exact position by this item.
antenna to anti-clockwise and clockwise respectively.
I. Transponder : Selects the Transponder to catch the strong signal.
J. Goto the position
After setting the Longitude, Latitude and the longitude of the selected satellite, this
menu is used when you want to move the desired direction (position) of the dish saved
before. Its moving limit is ±65°.
Factory Setting
All the stored data can be reset just like it was manufactured. The factory setting has
two steps. The first is to reset the channel data and other system configurations except
Motorized DiSEqC1.2 setting. The second is to reset the parameters of Motorized
DiSEqC 1.2.
Format Hard Disk
To format the HDD in PVR, Press
Formatting Hard Disk will delete all the data and the files recorded in HDD permanently.
If a new HDD is installed, it should be formatted because the file structure of PVR is
different from others.
You can not use the Time shifting, Recording and playback functions with an
unformatted HDD.
OK
button at this Item.
37
V-
,
V+
button moves the
Advertisement
Table of Contents
