You cannot turn off all bands. If you turn off all bands, b1 Lo
(VHF Low Band) is automatically set to ON.
Setting
This menu controls whether the scanner will send an alert tone
when a Close Call signal is detected. The options are:
•
- Scanner beeps when a CC signal is found.
•
Close Call Tips
If You Want To -
Scan for Close Call
Transmissions while
Scanning other
Banks/Bands
UB367ZV_UBC355CLT_1208.indd 47
UB367ZV_UBC355CLT_1208.indd 47
Options
- Scanner does not beep when a CC signal is found
Here's How -
Press the
displays. Every two seconds there will be
a break in the scanner audio as it searches
for a nearby transmission.
key. The Close Call icon
47
2011/12/08 19:55:58
2011/12/08 19:55:58