Uniden UBC355CLT Owner's Manual page 17

2. Connect the RED wire of the DC power cord to the accessory
contact in your vehicle's +13.8 VDC fuse box.
3. Connect the BLACK wire of the DC power cord to the negative
side of the vehicle (usually the chassis).
Caution: In vehicles with a positive ground, the RED wire
connects to the chassis and the BLACK wire connects to
the accessory contact in the fuse box.
4. Insert the DC plug into the DC 13.8V jack on the back panel.
UB367ZV_UBC355CLT_1208.indd 17 UB367ZV_UBC355CLT_1208.indd 17
17
2011/12/08 19:55:57 2011/12/08 19:55:57