How Port Forwarding Changes The Communication Process - NETGEAR RANGEMAX WNR3500L User Manual

RangeMax™ Wireless-N Gigabit Router with USB WNR3500L User Manual
5. The IRC server sends a return message to your router using the NAT-assigned source port (as
in the previous example, let's say port 33333) as the destination port. The IRC server also
sends an "identify" message to your router with destination port 113.
6. Upon receiving the incoming message to destination port 33333, your router checks its session
table to determine whether there is an active session for port number 33333. Finding an active
session, the router restores the original address information replaced by NAT and sends this
reply message to your computer.
7. Upon receiving the incoming message to destination port 113, your router checks its session
table and learns that there is an active session for port 113, associated with your computer. The
router replaces the message's destination IP address with your computer's IP address and
forwards the message to your computer.
8. When you finish your chat session, your router senses the termination of communications. The
router then removes the session information from its session table, and incoming traffic is no
longer accepted on port numbers 33333 or 113.
To configure port triggering, you need to know which inbound ports the application needs. Also,
you need to know the number of the outbound port that will trigger the opening of the inbound
ports. You can usually determine this information by contacting the publisher of the application, or
user groups or newsgroups.
Note: An inbound port can be used by one computer at a time with the triggered
application.

How Port Forwarding Changes the Communication Process

In both of the preceding examples, your computer initiates an application session with a server
computer on the Internet. However, you might need to allow a client computer on the Internet to
initiate a connection to a server computer on your network. Normally, your router ignores any
inbound traffic that is not a response to your own outbound traffic. You can configure exceptions
to this default rule by using the port forwarding feature.
A typical application of port forwarding can be shown by reversing the client-server relationship
from our previous Web server example. In this case, a remote computer's browser needs to access
a Web server running on a computer in your local network. Using port forwarding, you can tell the
router, "When you receive incoming traffic on port 80 (the standard port number for a Web server
process), forward it to the local computer at 192.168.1.123." The following sequence shows the
effects of the port forwarding rule you have defined:
Customizing Your Network Settings
v1.0, November 2009
5-14