NETGEAR RANGEMAX WNR3500L User Manual page 102

RangeMax™ Wireless-N Gigabit Router with USB WNR3500L User Manual
Alternately, you can also type
Note: If you logged in to the router before you connected your USB device, you might
not see your USB device in the router screens until you log out and then log back in
again.
The following table explains the fields and buttons in this screen:.
Table 7-1. USB Storage Basic Settings
Fields and Buttons
Network Device Name
Available Network Share Name
folders
Read/Write
Access
Folder Name
Volume Name
Total/Free
Space
Edit button
Safely Remove USB Device button
USB Storage
\\readyshare in the address field of your Web browser.
Description
The default is \\readyshare. This is the name used to access the
USB device connected to the router.
If only 1 device is connected, the default share name is
USB_Storage. You can click the name shown or you can type it in
the address field of your Web Browser. If Not Shared is shown, the
default share has been deleted and no other share for the root
folder exists. Click the Edit button to change this setting.
Shows the permissions/access controls on the network folder: All –
no password (the default) allows all users to access the network
folder. The user name (account name) for All – no password is
guest. The password for admin is the same one that you use to
log in to the router main menu. By default, it is password.
Full path used by the network folder:
Volume name from the storage device (either USB drive or HDD).
Shows the current utilization of the storage device.
Click the Edit button to edit the Available Network folder settings.
See "Editing a Network Folder" on page
Click to safely remove the USB device attached to your router. See
"Unmounting a USB Drive" on page
v1.0, November 2009
7-6.
7-10.
7-5