Table of Contents
Advertisement
Optical drive
NOTE:
All optical drive spare part kits include an optical drive bezel, bracket, and screws.
Description
Blu-ray ROM DVD±RW SuperMulti DL Drive (Intel models only)
DVD±RW SuperMulti DL Drive
DVD-ROM drive
Before removing the optical drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the service door (see
Remove the optical drive:
1.
Position the computer upside-down.
2.
Remove the Phillips PM2.5×6.0 screw (1) that secures the optical drive to the computer.
3.
Push the optical drive tab (2) to release the optical drive from the computer.
Battery on page
36).
Service door on page
37).
Component replacement procedures
Spare part number
721527-001
721529-001
721528-001
41
Advertisement
Table of Contents
