Table of Contents
Advertisement
h.
System board (see
i.
Fan/heat sink assembly (see
Remove the processor:
1.
Position the system board upside-down.
2.
Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn counterclockwise
until you hear a click.
3.
Lift the processor (2) straight up and remove it.
NOTE:
The gold triangle (3) on the processor must be aligned with the triangle embossed on the
processor slot (4) when you install the processor.
Reverse this procedure to install the processor.
System board on page
66)
Fan/heat sink assembly on page
73)
Component replacement procedures
77
Advertisement
Table of Contents
