Entering An Auto-Configuration Code; Selecting A Provider And Loading Provider Data To The Base Station - Siemens Gigaset C470 IP Installation Manual

Saving VoIP access data
9

Entering an auto-configuration code

Auto Configuration
Please enter code
Ý
10
Selecting a provider and loading provider data to the
base station
Select Country
Germany
England
France
Netherlands, the
Ý
>
Select your country with the control
p
key (press down arrow).
>
Press the display key §OK§.
If your provider does not appear in the list, you have the following options:
>
Press the left display key
However, you can only make a call via VoIP once you have completed the provider details
using the Web configurator. Your VoIP provider will supply you with this data.
Exit the connection assistant by holding the end call key a and entering the provider
>
and VoIP account details via the Web configurator.
You will find more detailed information about this in the user guide on the enclosed CD.
>
Enter your auto-configuration code using the key-
pad (max. 32 characters).
>
Press the right-hand display key
All data necessary for VoIP telephony is loaded
directly from the Internet to your phone.
Following successful download,
OK
the display.
Proceed as described under
OK
"
twice and continue as described in
12
Select Provider
Provider 1
Provider 2
Provider 3
Provider 4
Ý
>
Select your provider with the control
p
key (press down arrow).
>
Press the display key §OK§.
.
§OK§
is shown in
Saved
.
OK
11
.
11