Configuration Summary (Telecommuter Example) - NETGEAR FVL328 Reference Manual

Reference Manual for the ADSL Modem Wireless Router DG834G

Configuration Summary (Telecommuter Example)

The configuration in this document follows the addressing and configuration mechanics defined
by the VPN Consortium. Gather all the necessary information before you begin the configuration
process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and
all of the parameters that need to be set on both sides. Assure that there are no firewall restrictions.
Table B-3. Configuration summary (telecommuter example)
VPN Consortium Scenario:
Type of VPN:
Security Scheme:
Date Tested:
Model/Firmware Tested:
Gateway
Client
IP Addressing:
Gateway
Client
192.168.0.1/24
Telecommuter Example
LAN IP
192.168.0.1
Router
(at employer's
main office)
Figure B-12
B-14
Scenario 1
PC/client-to-gateway, with client behind NAT router
IKE with Preshared Secret/Key (not Certificate-based)
May 2005
DG834G firmware version v2.10.20
NETGEAR ProSafe VPN Client v10.5.1 (build 8)
Fully Qualified Domain Name (FQDN)
Dynamic
Gateway A
WAN IP
FQDN
ntgr.dyndns.org
"fromDG834G.com"
v1.0, November 2005
NAT Router B
WAN IP
0.0.0.0
"toDG834G.com"
Router
(at telecommuter's
home office)
NETGEAR VPN Configuration
Client B
192.168.2.3
PC
(running NETGEAR
ProSafe VPN Client)