Adding Information Displays (G/Info Settings) - Olympus E-PL6 Instruction Manual

Adding information displays (G/Info Settings)

LV-Info (Shooting information displays)
Use [LV-Info] to add the following shooting information displays. The added displays are
displayed by repeatedly pressing the INFO button during shooting. You can also choose to
not show displays that appear at the default setting.
3
Highlight & Shadow display
Areas above the upper limit of brightness for the image are shown in red, those below the
lower limit in blue. [Histogram Settings] g "U Disp/8/PC" (P. 75)
q Info (Playback information displays)
Use [q Info] to add the following playback information displays. The added displays are
displayed by repeatedly pressing the INFO button during playback. You can also choose to
not show displays that appear at the default setting.
2013.06.01 12:30
Histogram display
Light box display
[q Close Up Mode] in the custom menu must be set to [mode2] to show this display.
Compare two images side-by-side. Press
display.
• The base image is displayed on the right. Use HI to select an image and press
move the image to the left. The image to be compared to the image on the left can be
selected on the right. To choose a different base image, highlight the right frame and
press .
• Press U to zoom in on the current image. To change the zoom ratio, press the INFO
button and use FG or the control dial.
• Use FGHI to view other areas of the picture. The image displayed changes each time
U is pressed.
2
x
86
ISO-A
200
L N
FullHD
F
01:02:03 01:02:03
P 250 F5.6 0.0 250 0.0
38 38
Histogram display
×10 ×10
15 Shadow Highlight
Highlight & Shadow display
to select the image on the opposite side of the
U
2
x
ISO-A
200
L N
FullHD
F
01:02:03 01:02:03
P 250 250 F5.6 0.0 0.0
38 38
Highlight & Shadow
display
15
15
Light box display
U
2
x
53
16
to
U
54