Copy Settings; Paper Options - Brother MFC-J615W Basic User's Manual

Copy settings

You can change the following copy settings.
Press COPY and then press a or b to scroll
through the copy settings. When the setting
you want is highlighted, press OK.
(Basic User's Guide)
For details about changing the following copy
settings, see page 45.

Paper Type

Paper Size
(Advanced User's Guide)
For details about changing the following copy
settings, see chapter 7:

Quality

Enlarge/Reduce

Density

Ink Save Mode

Stack/Sort

Page Layout

Book Copy

Watermark Copy

Set New Default

Factory Reset
Note
• If you want to sort copies, use the ADF.
• Book Copy, Watermark Copy and
Ink Save Mode features are supported
by technology from Reallusion, Inc.

Paper Options

8
Paper Type
If you are copying on special paper, set the
machine for the type of paper you are using to
get the best print quality.
a
Press
b
Load your document.
c
Enter the number of copies you want.
d
Press a or b to choose Paper Type.
e
Press d or c to choose Plain Paper,
Inkjet Paper, Brother BP71,
Brother BP61, Other Glossy or
Transparency.
Press OK.
f
If you do not want to change additional
settings, press Mono Start or
Color Start.
Paper Size
If you are copying on paper other than A4
size, you will need to change the paper size
setting. You can copy only on A4, Legal,
Letter, A5 or Photo 10 × 15 cm paper.
a
Press
b
Load your document.
c
Enter the number of copies you want.
d
Press a or b to choose Paper Size.
e
Press d or c to choose A4, A5,
10x15cm, Letter or Legal.
Press OK.
f
If you do not want to change additional
settings, press Mono Start or
Color Start.
Making copies
(COPY).
(COPY).
8
8
8
8
45